elevator part manufacturer

Guide Shoe

The guide shoe is a sliding guide device between the elevator guide rail and the car or counterweight. It can stabilize the car or counterweight on the guide rail so that it can only move up and down, preventing the car or counterweight from deflecting during operation. Tilt or swing. The upper part of the guide shoe can also be equipped with an oil cup to reduce the friction between the shoe lining and the guide rail.    Elevator guide shoes are composed of shoe linings, guide rail bodies, guide shoe seats, etc., and can be divided into two series: rolling guide shoes and sliding guide shoes. Sliding guide shoes are also divided into fixed sliding guide shoes and elastic sliding guide shoes. They are generally suitable for medium and high-rise buildings. Low-speed elevator.    The installation of guide shoes must meet the following requirements: A. After the upper and lower guide shoes are installed in place, they should be on the same vertical line, no skew or twist is allowed, and ensure that the upper and lower guide shoes are in line with the center of the safety jaw; B. Fixed guide shoes are mainly used for freight elevators. The clearance on both sides should be consistent, and the clearance between the lining and the top surface of the track should be 0.5-2mm.

Triangle Lock Assembly for Floor Door

The elevator triangle lock is a special lock used to open the elevator landing door under abnormal circumstances. It is usually a triangular lock and should not be used by non-professionals. Elevator triangle locks are mainly used for unlocking and special operations in emergencies, such as emergency rescue when passengers are trapped, regular equipment maintenance and inspection, and manual control in special situations such as power supply interruptions. At critical moments, the elevator triangle lock can quickly open the landing door to ensure the safety of passengers. The use of elevator triangle locks requires strict compliance with regulations. Only personnel who have undergone strict training and obtained special equipment operation qualification certificates can use it legally and compliantly. In addition, the use of elevator triangle locks must be accompanied by written instructions detailing the precautions that must be taken to prevent accidents that may result from failure to effectively relock the lock after unlocking.

Lift Key Switch

The elevator base station lock‌ is a lock used to control the elevator base station (that is, the landing where the car stops when running without instructions). It is usually used for electric door locks/elevator locks, key switches/power locks, electronic locks/electrical switches etc. This kind of lock has different specifications such as openings of 12MM, 16MM, and 19MM in terms of power locks, and also has specifications of openings of 16MM and 19MM in terms of turning tongue locks. The main function of the base station lock is to control the parking of the elevator at the base station floor, and to control the opening and closing of the elevator door through keys or electronic means, thereby further managing the elevator operation‌1. Choosing a reasonable base station can not only improve the efficiency of the elevator but the design and installation of the base station lock is also an important part of ensuring the safe operation of the elevator. In the elevator system, the base station lock is combined with the elevator control system to achieve fine control of the elevator operation, thus improving the safety and reliability of the entire elevator system. In addition, the specific type and specifications of the base station lock will be determined according to the design and usage requirements of the elevator to ensure perfect integration with the elevator system‌.

Oil Cup

The elevator oil cup is an important component in elevator maintenance. Its main function is to provide lubrication for moving parts such as elevator guide rails. This lubrication not only helps reduce the friction between the guide shoes and the guide rails but also protects the guide rails from rust, thereby ensuring the smooth operation of the elevator. The appropriate amount of oil is directly related to the normal operation and safety of the elevator. The elevator oil cup is designed to ensure the smooth operation of the elevator system, reduce wear and tear on mechanical components by providing necessary lubrication, extend the service life of the equipment, and improve passenger comfort. In practical applications, the maintenance and inspection of the oil cup is an important part of elevator maintenance. Any negligence may lead to a decline in elevator performance and even cause safety hazards. Therefore, regular inspection and maintenance of the elevator oil cup is one of the key links to ensure the safe operation of the elevator‌

Escalator Roller

Elevator and escalator rollers are important components in elevators and escalators. Their main function is to reduce friction so that elevators and escalators can run smoothly and smoothly. Rollers are typically made from high-quality materials to ensure long-term durability and stability. In the operation of elevators and escalators, the rollers bear important loads, so their quality and performance are crucial to the safe operation of the entire system. In addition, the design and manufacture of rollers also need to take into account the reduction of noise and vibration to improve passenger comfort.